Ubiquiti UACC-FLEX-UTILITY-PRO | Flex Utility Pro Enclosure

A weatherproof outdoor enclosure for protecting UniFi networking gear at wall or pole-mounted locations where exposure to weather is a concern.

Why this one

• IPX6 weatherproofing means it handles jets of water from any direction, which is what makes it suitable for open eaves, rooftop plant rooms, and exposed pole mounts.
• At 350 × 220 × 89 mm, the internal volume is large enough to fit a small switch, injector or similar device — not just a cable junction.
• Polycarbonate construction resists UV degradation and impact better than ABS, which matters for equipment that stays outdoors for years rather than months.
• Supports both wall and pole mounting, so you're not locked into a single installation type before you've decided where the gear will live.

Good fit if you need to locate a PoE injector, small switch, or similar device outdoors and want a proper sealed enclosure rather than improvising with a weatherproof box from a hardware store.

Worth considering something else if your equipment is already in a sheltered indoor cabinet or telco room, where the IPX6 rating adds cost without adding anything useful.

What you'll also need

Outdoor-rated Cat5e or better to run into the enclosure, conduit fittings or cable glands to maintain the weatherproof seal at the entry points, and a pole or wall bracket if mounting hardware isn't already in place.

Technical specifications

Overview