Ubiquiti USW-AGGREGATION | UniFi Aggregation Switch | 80 Gbps Switch
Ubiquiti USW-AGGREGATION | UniFi Aggregation Switch | 80 Gbps Switch
An 8-port 10G SFP+ aggregation switch for rack environments where multiple UniFi switches or uplinks need to converge onto a high-speed backbone.
Why this one
- All eight ports run 10G SFP+, so every switch or server you connect gets a dedicated 10G uplink rather than sharing a single trunk — 80 Gbps non-blocking throughput means those links don't contend.
- Fanless design draws just 36W at full load, which matters in a comms room where fan noise accumulates across every device in the rack.
- Support for 1,000 VLANs and a 16,000-entry MAC table means it won't become the ceiling on a network that grows through segmentation or tenant expansion.
- The 1.3" touchscreen lets you check port status and basic diagnostics without opening UniFi Network — useful when you're standing at the rack mid-fault.
Good fit if you're running a UniFi stack where core switches need 10G uplinks to each other or to a server, and you want a dedicated aggregation layer without introducing fans or excess power draw into the rack.
Worth considering something else if your uplink requirement is a single 10G connection rather than eight — the USW-PRO-AGGR carries SFP+ ports alongside a full complement of RJ45 ports, which suits a mixed-speed environment better than a switch built purely for fibre or DAC uplinks.
What you'll also need
SFP+ transceivers or DAC cables to match your fibre or copper runs (sold separately), UniFi Network 5.14.12 or later running on a gateway or Cloud Gateway for management, and rack space — the unit is 1U and fits rack depths from 400 to 1,200 mm.
Technical specifications
Overview
| Dimensions | 442 x 120 x 43.7 mm (17.4 x 4.7 x 1.7") |
| 10G SFP+ | 8 (10G/1G) |
| Form Factor | Rack mount (1U) |
Performance
| Switching Capacity | 160 Gbps |
| Total Non-Blocking Throughput | 80 Gbps |
| Forwarding Rate | 119 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 16,000 |
| Packet Buffer Size | 1.5 MB |
| IPv4 | 128 |
| MAC | 128 |
Hardware
| Max. Power Consumption | 36W (Including SFP modules) |
| Power Method | Universal input, 100–240V AC, 50/60 Hz |
| Power Input Method | AC input |
| Power Supply | AC/DC, internal, 36W |
| Supported Voltage Range | 100–240V AC |
| Management | Ethernet AR |
| Heat Dissipation | 102 BTU/hr |
| Weight | Without mounting brackets: 2.6 kg (5.8 lb) With mounting brackets: 2.7 kg (6 lb) |
| Enclosure Material | SGCC steel |
| Mount Material | SGCC steel |
| Supported Rack Depth | 400~1200 mm (15.7-47.2") |
| LCM Display | 1.3" touchscreen |
| ESD Protection | Air: ± 16kV, contact: ± 12kV |
| Ambient Operating Temperature | -5 to 40° C (23 to 104° F) |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC, Anatel: 04456-21-08356 |
Software
| UniFi Network | Version 5.14.12 and later |
