Ubiquiti U7-PRO-MAX | UniFi U7 Pro Max | WiFi 7 | 2.5 GbE | PoE+
Ubiquiti U7-PRO-MAX | UniFi U7 Pro Max | WiFi 7 | 2.5 GbE | PoE+
A ceiling-mount WiFi 7 access point for large open spaces — conference centres, warehouses, open-plan floors — where 500+ clients and tri-band density demand more than a standard AP can deliver.
Why this one
- Eight spatial streams across three bands (4×4 on 5 GHz, 2×2 on 6 GHz, 2×2 on 2.4 GHz) means the radio stack isn't the bottleneck when dozens of clients connect simultaneously.
- The 6 GHz band tops out at 5.8 Gbps on 320 MHz channels — spectrum that older devices don't touch, so WiFi 7 clients get a clear lane without competing against legacy hardware.
- A dedicated spectral scanning engine monitors interference continuously without pulling any radio offline, which is what lets it maintain stable performance in RF-congested environments rather than just claiming to.
- The 2.5 GbE uplink means the backhaul won't cap throughput even when the AP is running near its rated capacity; a standard Gigabit uplink would saturate well before the radios do.
Good fit if you're covering a large open-plan space with a high concentration of clients — think a busy conference floor, a warehouse with mobile scanners, or a venue — and your switch already supplies PoE+.
Worth considering something else if you're covering a smaller area or a typical office with moderate client counts, where the U7-PRO handles 300+ clients at a lower price point without the 6 GHz band going to waste.
What you'll also need
A PoE+ switch or injector (802.3at minimum; the AP draws up to 25W), Cat5e or better to the ceiling, and a UniFi Network controller running version 8.2.93 or later — a Cloud Gateway or Dream Machine handles this if you don't already have a controller in place.
Technical specifications
Overview
| Dimensions | ⌀206 x 46 mm (⌀8.1 x 1.8") |
| WiFi Standard | WiFi 7 |
| Spatial Streams | 8 |
| Coverage Area | 160 m² (1,750 ft²) |
| Max. Client Count | 500+ |
| Uplink | 2.5 GbE |
| Mounting | Ceiling, Wall (Pro Mount Included) |
| Power Method | PoE+ |
Performance
| 6 GHz | 2 x 2 (DL/UL MU-MIMO) |
| 5 GHz | 4 x 4 (DL/UL MU-MIMO) |
| 2.4 GHz | 2 x 2 (DL/UL MU-MIMO) |
| 6 GHz | 5.8 Gbps (BW320) |
| 5 GHz | 8.6 Gbps (BW240) |
| 2.4 GHz | 688 Mbps (BW40) |
| 6 GHz | 5.9 dBi |
| 5 GHz | 6 dBi |
| 2.4 GHz | 4 dBi |
| 6 GHz | 23 dBm |
| 5 GHz | 29 dBm |
| 2.4 GHz | 23 dBm |
| Max. BSSIDs | 8 per Radio |
| 802.11be (WiFi 7) | 6 GHz: 7.3 Mbps to 5.8 Gbps (MCS0 - MCS13 NSS1/2, EHT 20/40/80/160/320) 5 GHz: 7.3 Mbps to 8.6 Gbps (MCS0 - MCS13 NSS1/2/3/4, EHT 20/40/80/160/240) |
| 802.11ax (WiFi 6/6E) | 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) |
| 802.11ac (WiFi 5) | 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) |
| 802.11n | 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40) |
Hardware
| Max. Power Consumption | 25W |
| Supported Voltage Range | 44–57V DC |
| Networking Interface | (1) 1/2.5 GbE RJ45 port |
| Weight | 680 g (1.5 lb) |
| Management | Ethernet |
| Enclosure Material | Polycarbonate, aluminum |
| Mount Material | Stainless steel (SUS304), galvanized steel (SGCC) |
| System | White/Blue |
| Channel Bandwidth | HT 20/40, VHT 20/40/80/160, HE 20/40/80/160, EHT 20/40/80/160/240/320 (MHz) |
| Operating Frequency | US/CA: 2400 - 2472 MHz U-NII-1: 5150 - 5250 MHz U-NII-2A: 5250 - 5350 MHz U-NII-2C: 5470 - 5725 MHz U-NII-3: 5725 - 5850 MHz U-NII-5 to U-NII-8: 5925 - 7125 MHz Worldwide: 2400 - 2483.5 MHz 5150 - 5850 MHz 5925 - 7125 MHz |
| Ambient Operating Temperature | -30 to 50° C (-22 to 122° F) |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC, Anatel: 08959-24-08356 |
Software
| UniFi Network | Version 8.2.93 and later |
