Ubiquiti UA-BUTTON | UniFi Access Button
Ubiquiti UA-BUTTON | UniFi Access Button
An indoor push-to-exit button that wires directly into a UniFi Access Hub to release a door latch without touching a reader or phone.
Why this one
- It connects natively to a UniFi Access Hub — no relay wiring to a separate controller, so the exit event logs in UniFi Access alongside entries from your readers.
- A rated mechanical life of 1,000,000 clicks means it won't need replacing in a typical office doorway for the life of the fit-out.
- The 30V DC, 2A contact rating covers the standard electric strikes and maglocks used with UniFi Access door hardware without needing an intermediary relay board.
- Available in black or white, with a polycarbonate and SGCC steel mount that sits flush against a standard wall box.
Good fit if you're building out a UniFi Access door and need a compliant, logged exit path — particularly for fire-egress doors where a physical push-to-exit is required alongside the electronic lock.
Worth considering something else if your door controller isn't a UniFi Access Hub, or if the installation is outdoors — this button is rated for indoor use only (0–40°C), so an exposed external mounting point rules it out.
What you'll also need
A UniFi Access Hub to power and connect the button, a compatible door lock (electric strike or maglock within the 30V DC, 2A contact rating), and a UA-G2, UA-G3, or similar UniFi Access reader on the entry side to complete the door setup.
Technical specifications
Mechanical
| Dimensions | 137 x 88 x 38.1 mm (5.4 x 3.5 x 1.5") |
| Weight | 180 g (6.3 oz) |
| Enclosure Material | Polycarbonate |
| Mount Material | Polycarbonate, SGCC steel |
| Available Colors | Black, white |
| Indoor and Outdoor Use | Indoor only |
Hardware
| Mechanical Life | 1,000,000 clicks |
| Power Method | UniFi Access Hubs UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU |
| Contact Type | (1) Normal open |
| Contact Rating | 30V DC, 2A |
| UL 294 Level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I |
| UL 294 Statement | Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: 1 |
| Document number, and issue date and/or revision level | UA-Button, V01 |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Ambient Storage Temperature | -40 to 70° C (-40 to 158° F) |
| Ambient Operating Humidity | 5 to 90% noncondensing |
| Certifications | CE, UL 294, CAN/ULC-60839-11-1 |
