Ubiquiti UVC-AI-TURRET | AI Turret Camera | 4K | IP66 | PoE+
Ubiquiti UVC-AI-TURRET | AI Turret Camera | 4K | IP66 | PoE+
A 4K outdoor turret camera for sites that need serious night coverage and AI detection in a housing that can take physical abuse.
Why this one
- The 1/1.8" sensor paired with IR LEDs rated to 40m means usable footage at the far end of a car park, not just the first few metres closest to the camera.
- IK08 impact resistance alongside IP66 weatherproofing means the housing stands up to a knock or deliberate interference, not just rain — relevant anywhere the camera is reachable from the ground.
- The quad-core processor runs AI person and vehicle detection on the camera itself, so your NVR isn't doing the heavy lifting and alerts don't depend on continuous cloud processing.
- A 109.9° horizontal field of view covers a wide approach or room without needing to pan, and the turret form factor lets you aim precisely after mounting rather than repositioning the whole bracket.
Good fit if you're covering an entrance, loading dock, car park or any outdoor area where the camera may be within reach of passers-by, you need 40m of night vision, and you have a PoE+ switch or injector available at the mounting point.
Worth considering something else if you need to cover a long, narrow corridor or a specific distant point — the UVC-G6-PRO-BULLET suits tight, long-range angles better than a wide-field turret, and if you don't yet have a UniFi Protect NVR, the camera cannot record on its own.
What you'll also need
A UniFi Protect NVR (UNVR, UNVR-PRO, or a Dream Machine with Protect), a PoE+ switch or injector (802.3at — standard PoE is not sufficient at 20W draw), and outdoor-rated Cat5e or better to the mounting point; available in black or white.
Technical specifications
Overview
| Dimensions | ⌀118 x 111 mm (⌀4.6 x 4.4") |
| IR Night Vision | 40 m (131 ft) |
| Resolution | 4K |
| Field of View | H: 109.9°, V: 56.7°, D: 134.1° |
| Audio | Two-way audio |
| Weatherproofing | IP66 |
| Tamper Resistance | IK08 |
| Mounting | Ceiling, arm, wall, pendant mount, junction box |
Performance
| Networking Interface | GbE RJ45 port |
| Image Settings | Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, HDR |
| Max. Frame Rate | 30 FPS |
| Resolution | 8MP 3840 x 2160 (16:9) |
| Sensor | 1/1.8" 8MP |
| Lens | Fixed focal length |
| Night Mode | Built-in IR LED illumination and IR cut filter |
Hardware
| Max. Power Consumption | 20W |
| Supported Voltage Range | 42.5–57V DC |
| Power Method | PoE+ |
| Processor | Quad-core Arm® Cortex®-A53 based chip |
| Weight | 990 g (2.2 lb) |
| Enclosure Material | Aluminum alloy, polycarbonate |
| Expansion Slot | MicroSD Card |
| Button | (1) Factory reset |
| Cable Connector Type | RJ45 |
| Cable Diameter | 4.5 mm (0.2") |
| Cable Length | 30 cm (1 ft) |
| Jacket Material | Thermoplastic elastomer |
| Jacket Enclosure Dimensions | ⌀20 x 70.6 mm (0.8 x 2.8") |
| Jacket Enclosure Material | Thermoplastic elastomer, polycarbonate, silicone rubber |
| Ambient Operating Temperature | -30 to 50º C (-22 to 122º F) |
| Ambient Operating Humidity | 0 to 90% noncondensing |
| Certifications | CE, FCC, IC |
