Ubiquiti UVC-G5-FLEX | G5 Flex Camera | 2K | IPX4 (While Covered)…
A compact 2K PoE camera for covered outdoor spots, internal spaces, and anywhere a full-sized bullet would be overkill.
Why this one
- The 102.4° horizontal field of view captures a wide arc from a single mounting point — useful for reception desks, small car parks, or covered entryways where you need breadth rather than reach.
- At 4W draw and 170g, it runs on any PoE port a UniFi switch provides and is light enough to reposition without rewiring — which makes it a practical choice when camera placement isn't finalised.
- IPX4 splash resistance holds up under a covered eave or in a car park stairwell, though it is not rated for direct rain exposure, so placement matters.
- IR illumination reaches 6m, which suits corridors, reception areas, and covered entries at typical indoor distances rather than open outdoor spans.
Good fit if you're covering interior spaces, covered outdoor areas, or low-ceiling spots where a wide-angle 2K feed is more useful than long-range night vision, and you already have a UniFi Protect NVR or plan to add one.
Worth considering something else if your mounting point is exposed to direct weather or you need night vision beyond 6m — the G5 Bullet (UVC-G5-BULLET) carries IP55 and reaches further, or the G6 Bullet (UVC-G6-BULLET) steps up to 4K and IP66 for fully exposed outdoor runs.
What you'll also need
A UniFi Protect NVR — either a UNVR, UNVR-PRO, or a Dream Machine with Protect built in — a PoE switch or injector, and Cat5e or better to the mounting point; desktop, wall, and pole mounts ship in the box, with in-ceiling and pendant options sold separately.
Technical specifications
Overview
| Dimensions | ⌀48 x 107.5 mm (⌀1.9 x 4.2") |
| IR Night Vision | 6 m (20 ft) |
| Resolution | 2K |
| Field of View | H: 102.4°, V: 54.9°, D: 120.6° |
| Audio | Microphone |
| Weatherproofing | IPX4 (While Covered) |
| Tamper Resistance | IK04 |
| Mounting | Desktop, Wall, pole mount, hard-ceiling (Included) In-ceiling mount, pendant, Pro mount (Optional) |
Performance
| Networking Interface | 10/100 MbE RJ45 port |
| Image Settings | Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay |
| Max. Frame Rate | 30 FPS |
| Resolution | 4MP 2688 x 1512 (16:9) |
| Sensor | 5MP CMOS |
| Lens | Fixed focal length |
| Night Mode | Built-in IR LED illumination and IR cut filter |
Hardware
| Max. Power Consumption | 4W |
| Supported Voltage Range | 37—57V DC |
| Power Method | PoE |
| Processor | Dual-core Arm® Cortex®-A7 based chip |
| Pole Mount Diameter | 1–1.5" (25–38 mm) |
| Weight | 170 g (6 oz) |
| Enclosure Material | Polycarbonate |
| Mount Material | Polycarbonate |
| Button | (1) Factory reset |
| Ambient Operating Temperature | -20 to 40° C (-4 to 104° F) |
| Ambient Operating Humidity | 0 to 90% noncondensing |
| Certifications | CE, FCC, IC |