Ubiquiti UVC-G6-TURRET | G6 Turret Camera | 4K | IP66 | PoE
A 4K outdoor turret camera for entrances, corridors and medium-range outdoor zones where a low-profile housing and wide field of view matter more than long throw.
Why this one
- The 1/1.8" sensor is physically larger than the 1/2.8" sensors in the G4 range, which is what makes the 30m IR night vision figure usable rather than optimistic in a dimly lit courtyard or entry.
- A 109.9° horizontal field of view covers a full doorway or corridor intersection in a single shot, so you're not stitching two cameras together to close a gap.
- AI detection runs on the camera's quad-core processor, classifying people and vehicles at the edge — your NVR handles recording, not the detection workload.
- IP66 weatherproofing and IK04 tamper resistance mean it handles direct rain and opportunistic interference without a separate protective housing.
Good fit if you're covering building entrances, car park access points, or indoor–outdoor transition zones at ranges up to 30m, and you already have a UniFi Protect NVR or plan to add one.
Worth considering something else if you need to cover a long open run beyond 30m — the G6 Bullet's directional housing suits that throw better — or if you have no NVR yet, as this camera cannot record on its own.
What you'll also need
A UniFi Protect NVR (UNVR or UNVR-PRO, or a compatible Dream Machine gateway), a PoE switch such as the USW-LITE-8-POE or larger, and outdoor-rated Cat5e or better run to the mounting point; ceiling and wall mounts are included, with arm, pendant and junction box mounts sold separately. Available in white or black.
Technical specifications
Overview
| Dimensions | ⌀100 x 95 mm (⌀3.9 x 3.7") |
| IR Night Vision | 30 m (98 ft) |
| Resolution | 4K |
| Field of View | H: 109.9°, V: 56.7°, D: 134.1° |
| Audio | Microphone |
| Weatherproofing | IP66 |
| Tamper Resistance | IK04 |
| Mounting | Ceiling, wall (Included) Arm, pendant, junction box (Optional) |
Performance
| Networking Interface | 10/100 MbE RJ45 port |
| Image Settings | Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, HDR |
| Max. Frame Rate | 30 FPS |
| Resolution | 8MP 3864 x 2160 (16:9) |
| Sensor | 1/1.8" 8MP |
| Lens | Fixed focal length |
| Night Mode | Built-in IR LED illumination and IR cut filter |
Hardware
| Max. Power Consumption | 12.5W |
| Supported Voltage Range | 37–57V DC |
| Power Method | PoE |
| Processor | Quad-core Arm® Cortex®-A53 based chip |
| Weight | 550 g (1.2 lb) |
| Enclosure Material | Aluminum alloy, polycarbonate |
| Button | (1) Factory reset |
| Cable Connector Type | RJ45 |
| Cable Diameter | 4.5 mm (0.2") |
| Cable Length | 30 cm (1 ft) |
| Jacket Material | Thermoplastic elastomer |
| Jacket Enclosure Dimensions | ⌀20 x 70.6 mm (0.8 x 2.8") |
| Jacket Enclosure Material | Thermoplastic elastomer, polycarbonate, silicone rubber |
| Ambient Operating Temperature | -30 to 50º C (-22 to 122º F) |
| Ambient Operating Humidity | 0 to 90% noncondensing |
| Certifications | CE, FCC, IC |